For laboratory research use only. Every lot independently tested; certificates published by lot.

Thymosin Alpha 1 research peptide

Thymosin Alpha 1 from Thymosin Alpha Labs is a synthetic 28-residue acetylated peptide, supplied as a white lyophilized powder in 5 mg vials. Every lot is independently tested, and its results are published as a lot record.

Last updated

3108.32
Molecular weight (g/mol)
≥95%
Release specification
LC-MS
Identity confirmed on every lot
1 size
5 mg vials

Thymosin Alpha 1 at a glance

Specifications and current testing status in one place.

Product
Thymosin Alpha 1
Type
Synthetic 28-residue acetylated peptide, 28 residues
Also known as
Thymosin α1, Tα1
CAS number
62304-98-7
Molecular formula
C129H215N33O55
Molecular weight
3108.32 g/mol (average)
Form
White lyophilized powder
Vial sizes
5 mg
Purity, current lots
Certificate in progress
Purity specification
≥95%
Identity
Confirmed by LC-MS on every lot
Testing laboratory
Freedom Diagnostics (independent)
Operated by
Klow Labs LLC, Chicago, IL
Where to order
klow.bio

What Thymosin Alpha 1 is

Thymosin Alpha 1 (thymosin α1) is a 28-residue peptide, acetylated at its N-terminus, that was first isolated from thymosin fraction 5, an extract of calf thymus. It is cut from the precursor protein prothymosin α. The sequence is strongly acidic, with seven glutamates and three aspartates against four lysines, so the molecule carries a large net negative charge at neutral pH, and it has no aromatic residues and no cysteine. Thymosin α1 is studied in immunology research for its effects on T-cell maturation in laboratory models.

Thymosin Alpha Labs supplies it as a lyophilized powder in 5 mg vials through Klow.bio. Each lot is tested by an independent laboratory for HPLC-UV purity, LC-MS identity and net content, and its certificate is published here.

Structure

Ac-Ser1 is acetylated and Asn28 ends in a free acid. With no tryptophan, tyrosine or phenylalanine, the peptide absorbs only weakly above 220 nm, so HPLC purity is read at the peptide-bond wavelength.

complete Thymosin Alpha 1 specifications.

Storage and handling

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening. Lyophilized material absorbs moisture from the air, and absorbed moisture restarts the reactions that drying slows, so keep vials sealed until needed. Storage and stability guide.

Thymosin Alpha 1 specifications
ProductThymosin Alpha 1
TypeSynthetic 28-residue acetylated peptide
Molecular formulaC129H215N33O55
Molecular weight3108.32 g/mol (average)
Length28 residues
SequenceAc-SDAAVDTSSEITTKDLKEKKEVVEEAEN
N-terminusAcetyl (Ac-Ser1)
C-terminusFree acid (Asn28)
CAS number62304-98-7
FormWhite lyophilized powder
Vial sizes5 mg
Purity specification≥95% (HPLC-UV)
StorageStore sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.
DesignationResearch use only

Thymosin Alpha 1 research peptide: sizes and current lot results

Price: $19.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%). Current prices are always on klow.bio.

Vial sizeCurrent lotPurity (HPLC-UV)IdentityNet contentEndotoxinCertificateOrder
5 mg Certificate pending Order 5 mg

Ordering and shipping. Thymosin Alpha 1 is sold through klow.bio, operated by Klow Labs LLC. Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout. See shipping and returns.

How every Thymosin Alpha 1 lot is tested

All testing is performed by Freedom Diagnostics, an independent laboratory, on every lot.

HPLC-UV purity

Answers: how much of the sample is the main compound?

Reversed-phase high-performance liquid chromatography separates the sample's components by hydrophobicity, and a UV detector records each as a peak. Purity is the main peak's area as a percentage of all detected peak area.

Limits: does not identify the peak, and impurities that co-elute or absorb weakly in UV can be under-counted. More on HPLC

LC-MS identity

Answers: is the main compound Thymosin Alpha 1?

The separated sample enters a mass spectrometer via electrospray ionization, which gives the molecule one or more charges. The observed ions, near m/z 1555 (2+) and 1037 (3+), are matched against values calculated from Thymosin Alpha 1's molecular weight of 3108.32.

Limits: confirms molecular weight, not amino-acid order.

Net content

Answers: how much Thymosin Alpha 1 is in the vial?

The laboratory quantifies the main compound in the tested vial against a standard. It is reported in milligrams next to the labeled vial size.

Limits: measured on the vial tested; other vials from the same lot are expected to be similar but are not individually measured.

Current lot

Identity by LC-MS, with the laboratory’s reference numbers.

Certificate in progress. The current batch is with the testing laboratory. Its certificate of analysis will be published here, with purity, identity and net content, as soon as the report is issued. Current availability on Klow.bio.

Thymosin Alpha 1 questions

What is Thymosin Alpha 1?

Thymosin Alpha 1 is a synthetic 28-residue acetylated peptide. Thymosin Alpha Labs supplies it as a white lyophilized powder in 5 mg vials, with an independent certificate of analysis for every lot.

What is Thymosin Alpha 1 research material?

Thymosin Alpha 1 research material is Thymosin Alpha 1 supplied for laboratory research, sold by lot, with each lot's identity, purity and net content documented by an independent laboratory in a published certificate of analysis.

What is the molecular formula and weight of Thymosin Alpha 1?

The molecular formula is C129H215N33O55 and the average molecular weight is 3108.32 g/mol. The peptide has 28 residues.

How should Thymosin Alpha 1 be stored?

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.

Where is the current Thymosin Alpha 1 certificate?

The current batch is with the laboratory. Its certificate will be published on this site when the report is issued.

What is the sequence of thymosin α1?

Ac-SDAAVDTSSEITTKDLKEKKEVVEEAEN: 28 residues with an acetylated N-terminus, C129H215N33O55, 3108.32 g/mol.

Where can I buy Thymosin Alpha 1?

Current Thymosin Alpha 1 research material availability is provided through Klow.bio, the purchasing platform operated by Klow Labs: https://klow.bio/product/thymosin-alpha-1/ Lot records, testing information and certificates of analysis are published on thymosinalpha.bio so they can be reviewed before purchasing.

Can I order Thymosin Alpha 1?

Yes. Purchasing information and current availability for Thymosin Alpha 1 research material are provided through Klow.bio: https://klow.bio/product/thymosin-alpha-1/

Is every Thymosin Alpha 1 lot independently tested?

Yes. Every lot is tested by Freedom Diagnostics, an independent laboratory, for HPLC-UV purity, LC-MS identity and net content. The stated release specification is ≥95% HPLC-UV purity with identity confirmed by LC-MS.

How can I verify a Thymosin Alpha 1 lot?

Enter the lot number from your vial label at thymosinalpha.bio/verify/ to see that lot's results. To confirm with the laboratory directly: Scan the Freedom Diagnostics QR code printed on the certificate, then search for klow.bio under the Company tab to view the laboratory record.

How much does Thymosin Alpha 1 cost?

The current price is $19.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%). Current pricing is always listed on Klow.bio.

How fast does Thymosin Alpha 1 ship?

Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout.

Buy Thymosin Alpha 1

5 mg vials. The current batch's certificate is in progress. Current purchasing is available through Klow.bio.